MAIN FEATURES

  • QBE allows you to control several automated systems inside or outside the home with just one device, simply using your smartphone.

  • You can control QBE not only with the smartphone App but also via Alexa voice controls.

  • QBE is the perfect solution for new homes or during renovations where it is not possible to wire the entire building.

  • Thanks to the Wi-Fi connection, QBE allows remote control of your home even when you are away.

  • Different devices that until now could not communicate with each other can now interact thanks to fully customisable scenarios.

  • QBE" app available for the end user and "QBE SetUp" app for the installer.

The wireless connected home

OUR RANGE

QBE Smart Home

842EC-0020

QBEDFSB1 - Radio-frequency and WiFi Smart Home Gateway, with one App to manage all connected devices, remotely or on site.

Download QBE conformity declaration (CE RED)

Compatible radio modules

67600470

The module features one relay output with potential-free NO contact, to control one electrical load, and one x 230 VAC digital input to connect control devices (buttons or switches). The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

Download FASCICOLO OH/1O16WL MULTI4A A3 (IT, EN, FR, RU)
Download FASCICOLO OH/1O16WL MULTI4A A3 (IT, EN, FR, RU)
Download OH/1O16WL conformity declaration (CE RED)

    67600480

    It features two, NO contact, free-from-potential, relay outputs, for controlling two single electric loads, such as, lights, or a double electric load, such as, a shutter motor, and two, 230V AC digital inputs for control devices, such as, buttons or switches. The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

    Download FASCICOLO OH/2O16WL MULTI4A A3 (IT, EN, FR, RU)
    Download FASCICOLO OH/2O16WL MULTI4A A3 (IT, EN, FR, RU)
    Download OH/2O16WL conformity declaration (CE RED)

      67600720

      The module features one relay output with potential-free NO contact, to control one electrical load, and one x 230 VAC digital input to connect control devices (buttons or switches). The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

      Download FASCICOLO OH/1O05WL MULTI4A A3 (IT, EN, FR, RU)
      Download FASCICOLO OH/1O05WL MULTI4A A3 (IT, EN, FR, RU)

        67600730

        It features a 3W to 300W one-channel dimmer for controlling lighting and one input for connecting control devices such as buttons. The container can be installed in a switchboard on a DIN rail.

        Download FASCICOLO OH/DIWL MULTI4A A3 (IT, EN, FR, RU)
        Download FASCICOLO OH/DIWL MULTI4A A3 (IT, EN, FR, RU)

          67600710

          It features one 0 - 10 V analog input, one relay output with NO contact for powering on and off the corresponding connected electrical load, plus one input for connecting control devices, such as buttons. The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

          Download FASCICOLO OH/DI010WL MULTI4A A3 (IT, EN, FR, RU)
          Download FASCICOLO OH/DIO10WL MULTI4A A3 (IT, EN, FR, RU)

            806SA-0040

            RSLV001 - Slave module for operators (002RSE module included).

            Download CAME CONNECT conformity declaration (CE RED)
            Download RSLV001 conformity declaration (CE ROHS)

            806SA-0150

            Slave Module to connect the operator to the CAME Connect gateways.

            Compatible tubular motors

            809Y5-0010

            230 V AC roller shutter gearmotor with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque. 10 Nm.

              809Y5-0020

              230 V AC roller shutter gearmotor with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque. 20 Nm.

                809Y5-0030

                230 V AC roller shutter gearmotor with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque. 30 Nm.

                  809Y5-0040

                  230 V AC roller shutter gearmotor with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque. 40 Nm.

                    809Y5-0050

                    230 V AC roller shutter gearmotor with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque. 50 Nm.

                      Sistemi di sicurezza compatibili

                      846AA-0190

                      Intrusion detection control unit with 8 wire connection points expandable up to 212 of which 128 radio. Features 3 local relay outputs, 2 RS485 bus lines for connecting expansion modules, keypads and transponder key readers. Integrated LAN interface for remote connection via Came Cloud, interfacing to Came Domotic 3.0 home automation systems and integration to Onvif IP CCTV systems. Supports 16 areas and 32 scenarios for system management. Connection to the PSTN and GPRS/3G network via optional modules.

                      Download FASCICOLO UTENTE PXC2-32-64-212 MULTI A4 (IT, EN, FR, DE)
                      Download PXC2 conformity declaration (CE RED)

                        846AA-0180

                        Intrusion control panel with 8 wired connection points expandable up to 64 wired or radio. Features 2 local relay outputs, 2 RS485 bus lines for connecting expansion modules, keypads and transponder key readers. Integrated LAN interface for remote connection via Came Cloud, interfacing to Came Domotic 3.0 home automation systems and integration to Onvif IP CCTV systems. Supports 8 areas and 32 scenarios for system management. Connection to the PSTN and GPRS/3G network via optional modules.

                        Download FASCICOLO UTENTE PXC2-32-64-212 MULTI A4 (IT, EN, FR, DE)
                        Download PXC2 conformity declaration (CE RED)

                          846AA-0170

                          Intrusion control unit with 8 wire connection points expandable up to 32 wire or radio. Features 1 local relay output, 1 RS485 bus line for connecting expansion modules, keypads and transponder key readers. Integrated LAN interface for remote connection via Came Cloud, interfacing to Came Domotic 3.0 home automation systems and integration to Onvif IP CCTV systems. Supports 4 areas and 32 scenarios for system management. Connection to the PSTN and GPRS/3G network via optional modules.

                          Download FASCICOLO UTENTE PXC2-32-64-212 MULTI A4 (IT, EN, FR, DE)
                          Download PXC2 conformity declaration (CE RED)

                            DOWNLOAD DOCUMENTS

                            Register for full access to technical documentation and installer services

                            REGISTER
                            GLOBAL | EN

                            CHOOSE YOUR COUNTRY

                            Where do you come from?