Automatic barriers / Barriers / GARD LS4 / 803BB-0410

803BB-0410

GLS40AGS

Automatic barrier with 24 V DC irreversible gearmotor with encoder; galvanized and painted steel cabinet with provision for accessories. Balancing spring included.

Catalogue

Depliant

Manuals and Certifications

Technical data	Value
Max. net clearance width (m)	3,8

24 V
CAME Connect
Encoder
EN Tested

Gearmotor or automation with encoder.

Automation tested in compliance with European standards regarding impact forces.

24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

120 V AC gearmotor for US markets.

230 V AC gearmotor.

230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.

Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.

Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.

Product compatible with CXN BUS 2-wire connection technology.

Product equipped with BRUSHLESS technology.

From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.

From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.

The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.

The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.

The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.

Technical data

Dato tecnico	Valore
Power supply (V – 50/60 Hz)	220-230 AC
Power supply to motor (V)	24 DC
Power (W)	190
Maneuvering time at 90° (s)	2 ÷ 6
Cycles/Hour	300
Operating temperature (°C)	-20 ÷ +55(-40 with item 803XA-0630)
Protection rating (IP)	54
Torque (Nm)	140
Reduction ratio (i)	202
Weight (Kg)	56

Operational limits

Technical data	Value
Max. net clearance width (m)	3,8

Complete your solution

Booms

803XA-0050

White painted aluminum boom, 90 x 35 mm, with groove cover-strip and shock-proof rubber profile. Length: 4050 mm.

803XA-0051

White painted aluminum boom, 90 x 35 mm, with groove cover strip and shock-proof rubber profile. Length: 3050 mm.

001G0402

Tube section barrier made of white, painted aluminum.Ø 60 mm, boom length: 4.2 m.

Extra accessories

002RSE

Interface card for controlling two operators or for enabling the Came Remote Protocol.

001R700

Control board for decoding and access-control management via transponder selector.

001R800

Control board for decoding and access-control management via keypad selectors.

CAME Connect

803XA-0300

Auxiliary contacts unit for detecting the boom position

803XC-0020

Modbus TCP/RTU bridge for integration with third party systems.

803XA-0290

Control card kit for operating during power outages and for recharging batteries, with battery housing.

24 V

001G02802

Support for fitting DIR-series photocells.

803XA-0630

Cartridge heater with thermostat.

009SMA

Single-channel magnetic sensor for detecting metal masses.

24 V

009SMA2

Double-channel magnetic sensor for detecting metal masses.

24 V

806LA-0060

Surface-mount flashing light for barriers and garage doors, operating on a 24 V AC/DC power supply. It features an integrated dual antenna (433.92 MHz and 868.35 MHz) and provides green, white, and red LED signals, ideal for GARD LT and LS barriers or wall installations.

24 V

Gateway

806SA-0140

Gateway to connect the automation to the cloud via WiFi or locally via Bluetooth selector (50 users)

CAME Connect