Control and safety accessories / Receivers / RBE Plus

RBE Plus

RBE Plus
  • The RBE Plus series controller is a robust modular board capable of managing up to 5,000 users, making it ideal for large-scale automation systems. It supports all CAME codes, including TOP, TAM, TWIN, and ROLLING CODE, using AF43S or AF868 boards. The RBE Plus can also manage up to 8 CXN BUS selectors and 4 CAME automation systems via CRP, with 4 inputs and outputs for enhanced control. It is available in 12-24 V AC/DC or 120-230 V AC versions, and can be easily connected to CAME CONNECT via a gateway for remote management and monitoring.
Catalogue
Depliant

Our range

Main characteristics

  • Simultaneous management of transmitters, keyboards and transponders
  • Management of up to 5,000 users
  • Connection of up to 8 CXN BUS accessories
  • 4 relay outputs
  • 4 digital inputs
  • Direct management of up to 4 CAME automations via CRP
  • Integrated clock for managing time slots
  • Advanced Quick & Easy with Code Function implemented directly on the keyboards
  • Event log for access control
  • CAME Key slot
  • Easy installation on DIN rail

Semplified installation

Thanks to the DIN rail mounting system, it is possible to attach RBE PLUS to the wall in a few seconds. However, the box is also designed for traditional mounting (4 screws + dowels) for greater flexibility during installation, for example in the case of uneven surfaces. The container is equipped with a special groove on the back to facilitate the wiring of the antenna cable.

The right frequency at your fingertips

RBE PLUS can manage up to 5000 users through the AF43S 433.92 MHz or AF868 868.00 MHz radio frequency cards. The special connector on the card allows you to insert the radio frequency card, simplifying installation and any maintenance.

Up to 8 CXN BUS accessories

The 806XG-0110 accessory allows you to simultaneously manage up to 8 selectors with CAME CXN BUS technology. Code keypads, transponders or key selectors can be integrated into the system easily and it is possible to manage up to 5000 codes and badges.

Integration with QUICK&EASY Access

RBE PLUS was designed to be natively integrated into the system for managing temporary access in QUICK&EASY Access accommodation facilities.

The ideal solution for Bed&Breakfasts, small hotels, campsites, warehouses and many other applications. The automatic management of access codes with the QUICK&EASY Access system combined with RBE PLUS allows the use of keyboards and allows you to generate a different code for each guest. The code will be valid from the date/time of check-in until check-out and the guest will receive an invitation email with the code to be used at the enabled gates.

The same code will be used to log in via smartphone, without the need to install any APP.

The property/management will be able to constantly monitor the event register, verify guest access and the access gate used.

Technical data

Models Power supply (V) Power supply to motor (V) Power (W) Current draw (A) Max. current draw (A) Max. power supply (V) Current draw at 24 V (mA) Crown turns (rpm) Duty/cycle (%) Force (N) Max. maneuvering speed (m/min) Maneuvering time at 90° (s) Cycles/hour Manouvering speed (m/min) Pinion module Reduction ratio (i) IP Protection rating Operating temperature (°C) Storage temperature (°C) Motor’s heat protection (°C) Length (mm) Package dimensions (mm) Weight (kg) Torque (Nm) Rpm speed (turns/min) Weight lifted (kg)* Duration of operation (min) Combinations Radio signal frequency (Mhz) Batteries Material Bluetooth Radio Frequency (GHz) Maximum speed measured at the end of the leaf (m/min) Product standards Compliance with directives Max. current draw (mA) Wireless Standard Casing material Operating relative humidity (%) Temperature reading precision (°C)
806RV-0060 24 15 54 -20° ÷ 55°C ÷ ÷ 433,92 – 868,35 x ABS
806RV-0070 120/230 13.5 54 -20° ÷ 55°C ÷ ÷ 433,92 – 868,35 x ABS