Gate automations / Sliding gate operators / BKX / 801MS-0690

801MS-0690

BKX08AGF

230 V automation with 24 V Brushless motor with speed up to 24 m/min, Adaptive Speed & Torque technology, complete with electronic board with graphic display, CAME Key ready, CXN BUS, B1 and B2 output, built-in radio decoding, control movement and obstacle detection for gates up to 800 kg and 20 m in length. RAL7024 gray cover.

Catalogue

Depliant

Manuals and Certifications

Technical data	Value
Max. weight of leaf (kg)	800

24 V
CAME Connect
Encoder
RIO System 2.0
EN Tested
CXN BUS
Brushless

Gearmotor or automation with encoder.

Automation tested in compliance with European standards regarding impact forces.

24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

120 V AC gearmotor for US markets.

230 V AC gearmotor.

230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.

Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.

Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.

Product compatible with CXN BUS 2-wire connection technology.

Product equipped with BRUSHLESS technology.

From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.

From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.

The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.

The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.

The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.

Operational limits

Technical data	Value
Max. weight of leaf (kg)	800

Complete your solution

Limit switch

001RSDN002

Magnetic limit-switch system for operators working in critical climatic conditions.

Unlocking devices

001H3000

Case for remote release with customized key, plus pull-cord handle and control button. Cord length L = 5 m.

230 V

Racks

009CGZ

Module 4 rack made of 22 x 22 mm galvanized steel.

009CGZS

Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers.

Adapter plates

801XC-0190

801XC-0200

801XC-0210

Electronic modules

806SA-0140

Gateway to connect the automation to the cloud via WiFi or locally via Bluetooth selector (50 users)

CAME Connect

806SS-0040

Wireless, plug-in radio control module for wireless accessories.

RIO System 2.0

002RSE

Interface card for controlling two operators or for enabling the Came Remote Protocol.

806XG-0080

BUS expansion module with 2 inputs and 2 outputs. Inputs can be configured in NO, NC or resistive mode (8K2), a warning light output and a relay output.

CXN BUS

001RSDN003

Heating system for operators installed in cold areas.