Gates automation / Sliding gate operators / BXV / 801MS-0210
801MS-0210

801MS-0210

BXV08AGS

Automation with 24 V motor, complete with electronic board with display, built-in radio decoding, movement management and obstacle detection for sliding gates up to 800 kg and 20 m in length. RAL7024 gray cover.

Catalogue
Depliant
Manuals and Certifications

Technical data

Value

Max. weight of leaf (kg)

800
  • 24 V
  • CAME Connect
  • Encoder
  • RIO System 2.0
Gearmotor or automation with encoder.
Automation tested in compliance with European standards regarding impact forces.
24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
120 V AC gearmotor for US markets.
230 V AC gearmotor.
230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.
Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.
Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.
Product compatible with CXN BUS 2-wire connection technology.
Product equipped with BRUSHLESS technology.
From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.
From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.
The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.
The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.
The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.

8K01MS-016

Anta fino a 20 m e peso fino a 800 kg

801MS-0210

Automation for sliding gates up to 800 kg and 20 m with 24 V motor

1

806TS-0270

Four-channel 433.92 MHz rolling code transmitter

1

001DIR10

Pair of 12 – 24 V AC – DC outdoor photocells

1

001AF43S

433,92 MHz plug-in radio frequency card.

1

001TOP-A433N

1

001TOP-RG58

1

Technical data

MODELS

-|24v–801MS-0210|-

Protection rating (IP)

54

Power supply (V – 50/60 Hz)

230

Power supply to motor (V)

24

Power (W)

400

Manouvering speed (m/min)

11

Duty/cycle (%)

HEAVY-DUTY SERVICE

Thrust (N)

800
    Operational limits

    Technical data

    Value

    Max. weight of leaf (kg)

    800

        Complete your solution

        Unlocking devices
        001H3000
        001H3000

        Case for remote release with customized key, plus pull-cord handle and control button. Cord length L = 5 m.

        • 230 V
        001RSDN001
        001RSDN001

        Pull-cord release device for operators.

        Limit switches
        001RSDN002
        001RSDN002

        Magnetic limit-switch system for operators working in critical climatic conditions.

        Electronic modules
        002RLB
        002RLB

        Circuit board for emergency operation and battery charging.

        • 24 V
        001RGP1
        001RGP1

        Green Power module to disconnect the transformer for energy saving while the operator is not in use.

        001R800
        001R800

        Control board for decoding and access-control management via keypad selectors.

        • CAME Connect
        001R700
        001R700

        Control board for decoding and access-control management via transponder selector.

        002RSE
        002RSE

        Interface card for controlling two operators or for enabling the Came Remote Protocol.

        806XG-0080
        806XG-0080

        BUS expansion module with 2 inputs and 2 outputs. Inputs can be configured in NO, NC or resistive mode (8K2), a warning light output and a relay output.

        • CXN BUS
        001RSDN003
        001RSDN003

        Heating system for operators installed in cold areas.

        Racks
        009CGZ
        009CGZ

        Module 4 rack made of 22 x 22 mm galvanized steel.

        009CGZP
        009CGZP

        Module 4 rack made of 10 x 10 mm PA6 nylon and steel-core fibre glass for sliding gates measuring up to 600 kg, plus fastening brace.

        009CGZS
        009CGZS

        Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers.

        Related products

        TTS
        TTS

        Transmitter featuring an elegant and refined design

        DLX
        DLX

        Square infra-red photocells

        RBE Plus
        RBE Plus

        Receiver and control board for access control up to 5.000 users

        Automation gateways
        Automation gateways

        CAME CONNECT automation gateways