Gates automation / Swing gate operators / ATS / 801MP-0090

801MP-0090

ATS30AGR

230 V irreversible telescopic gearmotor for swing gates with C Max. 200 mm, with provision for remote release, for leaves up to 3 m and 400 kg in weight. RAL7024 gray colour.

Catalogue

Depliant

Manuals and Certifications

Technical data			Value
Max. length of leaf (m)	3	2.5	2
Max. weight of leaf (kg)	400	600	800

230 V

Gearmotor or automation with encoder.

Automation tested in compliance with European standards regarding impact forces.

24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

120 V AC gearmotor for US markets.

230 V AC gearmotor.

230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.

Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.

Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.

Product compatible with CXN BUS 2-wire connection technology.

Product equipped with BRUSHLESS technology.

From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.

From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.

The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.

The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.

The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.

8K01MP-026

Up to 3 m leaves that weighs up to 400 kg

801MP-0050

230 V irreversible telescopic gearmotor for swing gates with C Max. 200 mm up to 3 m and 400 kg.

801MP-0090

230 V irreversible telescopic gearmotor with remote release predisposition up to 3 m and 400 kg. Gray RAL7024

001AF43S

433,92 MHz plug-in radio frequency card.

806TS-0270

Four-channel 433.92 MHz rolling code transmitter

806LA-0040

Wall-fastening base for KRX.

806LA-0030

LED flashing light with power supply from 24 V AC – DC up to 230 V AC

002ZA3P

Multifunction control panel for double-leaf swing gates with limit switch and speed management

001DIR10

Pair of 12 – 24 V AC – DC outdoor photocells

4228003000

Antenna cable L = 5 m.

Technical data

Dato tecnico	Valore
Power supply to motor (V)	230 AC
Absorption (A)	1
Power (W)	250
Maneuvering time at 90° (s)	15
Cycles/Hour	20
Thrust (N)	400 ÷ 3000
Operating temperature (°C)	-20 ÷ +55
Motor’s heat protection (°C)	150
Protection rating (IP)	54

Operational limits

Technical data			Value
Max. length of leaf (m)	3	2.5	2
Max. weight of leaf (kg)	400	600	800

Complete your solution

Control panels

002ZA3P

Multifunction control panel for two-leaved swing gates, with limit-switch control and slow-down speed adjusting.

230 V

002ZM3E

Multifunction control panel for swing gates with two leaves, graphic programming and alerts display, plus self-diagnosing safety devices and on-board radio decoding.