Gate automations / Swing gate operators / FTL / 801MB-0080

801MB-0080

FTL20DGC

24 V irreversible gearmotor complete with electronic board with dip switch settings, built-in radio decoding and articulated transmission arm for swing gates with C Max. 150 mm with leaf up to 2 m and 200 kg in weight. RAL7024 gray cover.

Catalogue

Depliant

Manuals and Certifications

Technical data				Value
Max. length of leaf (m)	2	1.7	1.5	1
Max. weight of leaf (kg)	200	225	230	250

24 V
Encoder
EN Tested

Gearmotor or automation with encoder.

Automation tested in compliance with European standards regarding impact forces.

24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

120 V AC gearmotor for US markets.

230 V AC gearmotor.

230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.

Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.

Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.

Product compatible with CXN BUS 2-wire connection technology.

Product equipped with BRUSHLESS technology.

From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.

From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.

The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.

The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.

The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.

Technical data

Dato tecnico	Valore
Power supply (V – 50/60 Hz)	230 AC
Power supply to motor (V)	24 DC
Absorption (A)	4 Max.
Power (W)	140
Maneuvering time at 90° (s)	from 19 to 25
Cycles/Hour	40
Thrust (N)	180
Operating temperature (°C)	-20 ÷ +55
Protection rating (IP)	44

Operational limits

Technical data				Value
Max. length of leaf (m)	2	1.7	1.5	1
Max. weight of leaf (kg)	200	225	230	250

Models	801MB-0080
LEAF OPENING (°)	A	B	C Max.	D	E
90	140	420 (490 with item 801XC-0070)	150 (300 with item 801XC-0070)	Min. 150	310 (410 with item 801XC-0070)
90	160 ÷ 180	380 (460 with item 801XC-0070)	150 (300 with item 801XC-0070)	Min. 150	310 (410 with item 801XC-0070)
110	200 ÷ 220	400 (470 with item 801XC-0070)	50 (300 with item 801XC-0070)	Min. 150	310 (410 with item 801XC-0070)

Complete your solution

Slave gearmotor

801MB-0050

24 V irreversible gearmotor with articulated transmission arm for swing gates with C Max. 150 mm with leaf up to 2 m and 200 kg in weight. RAL7024 gray cover.