Which safety devices do I need to install?
CAME products with EN Tested technology perfectly comply with the minimum requirements for impact force detection, however every installation will have different safety requirements. CAME offer a wide range of safety products such as the photocells, sensitive edges and signal lights.
We always recommend the installation of photocells, preferably on the side of the road if next to a public highway. If the operator is designed for intensive use, you can also install sensitive edges that reverse the direction of travel when in contact with any obstacle. Finally, we recommend a flashing light to signal the operator's motion status.
What is the average service life of a gate operator?
A gate operator generally has a service life of 10 years, but as with any automated product its decay varies in relation to the frequency and type of use and the maintenance carried out. Following the manufacturer's recommendations allows you to extend the service life of your automation.
Can I use the gate transmitter to open the garage door?
Certainly. You must configure the transmitter and in a few easy steps you're done. For example, in a common private dwelling, if owning a two-channel radio transmitter, it is possible to combine a channel for opening the gate and the other channel for the garage door.
How do I memorise Top transmitter at 433.92 MHz?
1. Simultaneously press the two top buttons of the new transmitter (in case of model with 4-keys), until the LED flashes faster;
2. Press the button on which you want to enable the open command;
3. Within 10 seconds from 'Phase 2', bring the already programmed transmitter close to the one still to be programmed by pressing the button that controls the replicate operation. After saving, the LED will flash 3 times;
4. Now the transmitter is ready to be used.
What does EN Tested mean?
All CAME products bear the exclusive EN Tested system marking, which certifies that the solution has been produced and tested according to the rigorous criteria of the European Standards as regards impact force. This means greater safety for the user and greater ease of installation and maintenance for the installer.
What precautions should I take if I have children in the house?
CAME products are subject to stringent safety tests before being marketed. EN Tested technology ensures that when the door or gate comes into contact with an obstacle, however minimal, the operator automatically blocks movement, reversing the direction. Want more peace of mind? CAME also always recommend the installation of safety accessories, such as photocells and flashing lights.
What do I need to know to choose the right gate automation?
In order to install a gate operator, in addition to knowing the width of the passage and the weight of the gate, you have to check the type of application and use for which it is intended. The choice of the right operator is crucial to ensure longer service life of your operator with less problems.
Gate Automation
Does CAME also sell gates and doors, or just the operators?
CAME manufactures and sells the world's widest range of automation systems for residential, commercial and industrial applications, including operators for swing or sliding gates, but do not sell gates or doors.
